How to Install Your Tape-On Visors - Installation Instructions

How to Install Your Tape-On Visors

• Step 1: Verify: Check fitment against your window before opening the plastic bag.
• Step 2: Clean: Use water and a clean cloth to wipe down the window frame; let it dry completely.
• Step 3: Align: Confirm placement one more time before exposing the adhesive tape.
• Step 4: Start: Peel back only the tips (1 inch) of the tape at each end.
• Step 5: Secure: Position the visor, check the alignment, then pull the remaining tape backing off slowly while pressing the visor firmly into place.

Installation Tip: For the strongest bond, install your visors in temperatures above 60°F (15°C). If installing in cold weather, lightly warm the vehicle's frame and the adhesive tape with a hair dryer before application.